Contact Direct on :
+90 (312) 472 59 77
HRR-HS-CT (ELECTROMECHANICAL OPERATED) GENERAL INFORMATION
Optima HRR-HS-CT electro-mechanical road blockers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high-security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high-security applications, road blockers are the unique solution and the most secure systems. Even though the attack is from high tonnage vehicles with high speeds, it is not possible for the vehicle to keep on moving because of the damage given to front, wheels and the bottom of the vehicle. Drive unit is electro-mechanical, but in case of power failure, road blocker can be lowered or lifted manually with the help of a UPS. It enables 6 half cycle raise/lower an emergency raise function. Typical raise/lower time is 5-6 seconds. With the help of Optima PLC (programmable logic control), raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off key switch, etc. Besides, safety accessories like inductive loop detectors, flashing lights or red/green traffic lights can be integrated into the system very easily. Also these road blockers have PAS68:2010 V/7500(N3)/80/90:0.0/6.15 Crash Tested Certificate. This means that M50‐P1 “zero penetration” according to American Standard.
Test parameters | PAS68: V/7500[N3]/80/90:0.0/6.15 |
Equivalent to | K12, M50, ASTM F2656, IWA14-1 |
Height when raised | 1100 mm |
Environmental durability | Red oxide painted, finishing with painted yellow & red stripes (‘STOP’ warning in the front) |
Axle load | 22 tons |
Structure | Heavy duty |
Top plate | Plain, painted to yellow with black stripes |
Type of steel | S235/RAEX250-Quality 37 minimum |
Red/green LED traffic light | Available, 200mm diameter, steel post 2 mt height and electrostatic ally powder coated |
Hinges | Heavy duty hardened and or stainless steel AISI 303 Quality for hydraulic cylinder connections and moving part of the blocker |
Bearing | Bronze |
Power | 380 V, 3 Phase, 50-60 Hz |
Raise lower time | 5-6 seconds |
Desktop keyboard | Raise, lower, emergency stop, key operated, ‘keyboard in use’ light indicator |
Extra I/O at the PLC | Enough I/O’s to connect any card reader, extra override keyboard etc. later on |
Proximity switch | Available to sense the position of the blocker |
Loop detector | This detector is used for safety |
Power back-up system options | UPS |
Cabinet | IP 65 with dust filter |
Times of Use | 720 full cycle/a day, heavy duty |
Environmental conditions | -20/+65°C, 95% humidity |